SMA connectors fall into the category of coax connectors that depend on proper torque of the retaining nut to ensure adequate electrical contact of the shield, ie proper connector performance.
Correct tensioning of connectors is vital to accurate measurments, especially when using a VNA.
Above is a small collection of tools for working with SMA connectors. The tools from top to bottom are top and bottom are:
The 5.5mm spanner can be hard to find, it seems that most
manufacturers don't make metric spanners below 6mm though 5.5mm is the
ISO standard size for nuts for 3mm thread. 7/32" AF and 5/16" AF respectively may be
suitable inch size substitutes. Ebay can be a good source for these
small tools, (1) came from the manufacturer in the US, (2)-(4) from a
UK Ebay seller, and (5) from an local online store. (Search on Ebay for "5.5mm
combination" to find a source for items 2-4.)
VK1OD on the 'net. I appreciate feedback, click on the ... in webm...@vk1od.net for my email address.
© Copyright: Owen Duffy 1995, 2012. All rights reserved. Disclaimer.